สว่านลม

●Non Reversible Type (*Drill chuck is an option, sold separately.)
NRD-6SA_photo
NRD-6PB_photo
NRD-10P_photo
NRD-12PA_photo
NRD-6SA
(Taper type)
NRD-6SA(T)
(Thread type)
NRD-6PB
(Taper type)
NRD-6PB(T)
(Thread type)
NRD-10P
(Taper type)
NRD-10P(T)
(Thread type)
NRD-12PA
(Taper type)
NRD-12PA(T)
(Thread type)

●Reversible type
NRD-16R_photo
NRD-23R_photo
NRD-14R, 16R, 19R, 22R
(Grip type)
NRD-14RLW, 16RLW, 19RLW, 22RLW
(Safety Lever type)
NRD-23R, 25R, 28R, 32LR
(Grip Type)
NRD-23RLW, 25RLW, 28RLW, 32LRLW
(Safety Lever Type)

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Drilling capacity Jacobs chuk Free speed Overall length Mass Spindle offset Feed length Air inlet thread Hose size Average air consumption
mm No. min-1 mm kg mm mm Rc mm m3/min
NRD-6SA 6.5 1 2,800 166 0.8 - - 1/4 6.3 0.5
NRD-6PB 6.5 1 2,400 149 0.8 - - 1/4 6.3 0.5
NRD-10P 10 2S 2,000 156 1.1 - - 1/4 9.5 0.55
NRD-12PA 13 6 1,500 187 2.6 - - 1/4 9.5 0.65
NRD-14R 14 MT1 1,100 436 5.3 39 60 3/8 12.7 1.1
NRD-16R 16 MT2 900 451 5.5 39 60 3/8 12.7 1.1
NRD-19R 19 MT2 750 451 5.5 39 60 3/8 12.7 1.1
NRD-22R 22 MT2 600 451 5.5 39 60 3/8 12.7 1.1
NRD-23R 23 MT2 500 355 10.5 41 100 1/2 12.7 1.4
NRD-25R 25 MT3 400 355 10.3 41 100 1/2 12.7 1.4
NRD-28R 28 MT3 350 355 10.3 41 100 1/2 12.7 1.4
NRD-32LR 32 MT3 270 355 10.3 41 100 1/2 12.7 1.4
Comments