เครื่องมือลม



NPK  Air Tools  Made in japan   สินค้าคุณภาพสูง ทนทาน ใช้งานนานปี มีอะไหล่รองรับ ผลิตโดยตรงจาก Nippon Pneumatic Mfg. Co., Ltd. ประเทศญี่ปุ่น
 เครื่องมือลม ยี่ห้อ NPK จากประเทศญี่ปุ่น พร้อมศูนย์บริการ และอะไหล่ สินค้ารับประกัน 1 ปี หมดกังวลเรื่องอะไหล่ซ่อม เรามีอะไหล่ทุกรายการ* More    online catalogue

HIGH QUALITY & EXTRA HEAVY DUTY INDUSTRIAL PNEUMATIC TOOLS DESIGNED FOR HEAVY ENGINEERING, MINING & TRANSPORT INDUSTRIES. BY NIPPON PNEUMATIC MFG. CO., OSAKA JAPAN.

NPK คือ เครื่องมือลมคุณภาพสูง ผลิตในประเทศญี่ปุ่น มีความทนทานเป็นพิเศษ เหมาะใช้ในโรงงานอุตสาหกรรม และงานที่เกี่ยวกับ Heavy Duty

สนใจสอบถามราคา โทร 083-188-9101 Line ID: 0831889101

>>แค๊ตตาล๊อก ออนไลน์<<



Impact Wrench (One Hammer)

The One-Hammer Impact wrenches are mostly used in repair and garage work shops. These wrenches have distinguishing features of being light weight, low in air consumption, exceptionally powerful impacting per blow. Built-in power reguration for easy adjustment.


●9.5mm(3/8")Sq.
NW-800_photo
SW-12_photo
NW-800S_photo
NW-800(S)
(6 steps of power control)
SW-12(R)
(Stepless power control)
NW-800S(S)
(Stepless power control)

●12.7mm(1/2")Sq. (4 steps of power control)
NW-1200B_photo
NW-1600HA_photo
NW-1600HA-AT_photo
NW-1200B(R)
NW-1200B(S)
NW-1200B(2R)
NW-1200B(2S)
NW-1600HA(R)
NW-1600HA(S)
NW-1600HA
(2R)
NW-1600HA-AT(R)
NW-1600HA-AT(S)

●12.7mm(1/2")Sq.(4 steps of power control)
NW-1600SA_photo
NAW-1200_photo
NAW-1600HA_photo
NW-1600SA(R)
NAW-1200(S)
NAW-1600HA(S)

●19.05mm(3/4")Sq.(4 steps of power control)
NW-2000HA_photo
NW-2800P_photo
NW-2000HA(R)
NW-2000HA(S)
NW-2000HA(4R)
NW-2800P(R)
NW-2800P(4R)

●25.4mm(1")Sq.(4 steps of power control)
NW-3500P_photo
NW-3500GA_photo
NW-4000_photo
NW-3500P
NW-3500GA(P)
NW-3500GA(6P)

NW-4000(P)
NW-4000(6P)

●25.4mm(1")Sq.(4 steps of power control)
NW-4300GA_photo
NW-5000A_photo
NW-4300GA(P)
NW-4300GA(6P)
NW-5000A(P)
NW-5000A(7P)
    

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Capacity
(Bolt size)
Free
Speed
Overall
Length
Mass Spindle
Offset
Square
shank size
Air inlet thread Hose size Average
air
consumption
mm min-1 mm kg mm mm Rc mm m3/min
NW-800 10 7,000 128 1.25 22.5 9.5 1/4 6.3 0.1
SW-12 12 8,000 124 1.26 27 9.5 1/4 6.3 0.1
NW-800S 10 8,000 178 1.1 25 9.5 1/4 6.3 0.1
NW-1200B 14 7,000 174 1.8 28 12.7 1/4 6.3 0.1
NW-1200B(2R) 14 7,000 224 2.1 28 12.7 1/4 6.3 0.1
NW-1600HA 16 5,000 195 2.5 31.8 12.7 1/4 6.3 0.15
NW-1600HA(2R) 16 5,000 244 5.7 31.8 12.7 1/4 6.3 0.15
NW-1600HA-AT 16 5,000 194 2.5 32.5 12.7 1/4 6.3 0.15
NW-1600SA 14 6,500 165 1.6 26 12.7 1/4 6.3 0.15
NW-2000HA 20 4,500 230 3.8 38 19.05 1/4 9.5 0.2
NW-2000HA(4R) 20 4,500 330 4.2 38 19.05 1/4 9.5 0.2
NW-2800P 25 5,000 225 5 41.5 19.05 3/8 9.5 0.25
NW-3500P 36 4,000 280 9.2 50 25.4 3/8 12.7 0.3
NW-3500GA 36 4,000 388 9.5 50 25.4 3/8 12.7 0.3
NW-3500GA(6P) 36 4,000 551 10.5 50 25.4 3/8 12.7 0.3
NW-4000 33 2,700 368 7.4 49.5 25.4 3/8 9.5 0.3
NW-4000(6P) 33 2,700 521 8.4 49.5 25.4 3/8 9.5 0.3
NW-4300GA 42 4,000 453 12.9 57 25.4 1/2 12.7 0.4
NW-4300GA(6P) 42 4,000 590 14.2 57 25.4 1/2 12.7 0.4
NW-5000 52 3,000 464 16.5 62 25.4 1/2 12.7 0.45
NW-5000(7P) 52 3,000 642 18 62 25.4 1/2 12.7 0.45



Straight Grinders

A full range of straight grinders isprovided.


■Safety Grip type
●32mm(1 1/4") Non governor
NHG-65K_photo
NHG-65LK_photo
NHG-65K-75_photo

NHG-65K-03
(3mm collet chuck)
NHG-65K-06
(6mm collet chuck)
NHG-65K-10
(1/8" collet chuck)
NHG-65K-20
(1/4" collet chuck)

NHG-65LK-03
(3mm collet chuck)
NHG-65LK-06
(6mm collet chuck)a

NHG-65LK-10
(1/8" collet chuck)
NHG-65LK-20
(1/4" collet chuck)

NHG-65LK-75

■Safety Grip Type
●65mm(2 1/2") Non Governor
NHG-65D
NHG-65LD
NHG-65LD-75_photo
NHG-65D
NHG-65LD
NHG-65LD-75

■Safety Grip Type
●100mm(4") Built-in governor ●125mm(5") Built-in governor ●150mm(6") Built-in governor
NHG-100A
NHG-125
NHG-150_photo
NHG-100A
NHG-125
NHG-150

■Safety Lever type
●32mm(1 1/4") Non governor
NHG-65KLW_photo
NHG-65LKLW_photo

NHG-65KLW-03
(3mm collet chuck)
NHG-65KLW-06
(6mm collet chuck)
NHG-65KLW-10
(1/8" collet chuck)
NHG-65KLW-20
(1/4" collet chuck)

NHG-65LKLW-03
(3mm collet chuck)
NHG-65LKLW-06
(6mm collet chuck)

NHG-65LKLW-10
(1/8" collet chuck)
NHG-65LKLW-20
(1/4" collet chuck)

■Safety Lever Type
●65mm(2 1/2") Non Governor
NHG-65DLW
NHG-65LDLW
NHG-65DLW
NHG-65LDLW

■Safety Lever Type
●100mm(4") Built-in governor ●125mm(5") Built-in governor ●150mm(6") Built-in governor
NHG-100ALW
NHG-125LW
NHG-150LW_photo
NHG-100ALW
NHG-125LW
NHG-150LW

 

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Capacity(Bolt size) Max. free speed Overall length Mass Air inlet thread Hose size Average air consumption
mm min-1 mm kg Rc mm m3/min
NHG-65K - 18,000 309 1.3 1/4 9.5 0.55
NHG-65K-BE - 18,000 359 1.5 1/4 9.5 0.55
NHG-65LK - 18,000 509 1.6 1/4 9.5 0.55
NHG-65LK-75 - 18,000 756 2.2 1/4 9.5 0.55
NHG-65D 65 x 13 x 9.5 14,600 309 1.3 1/4 9.5 0.55
NHG-65LD 65 x 13 x 9.5 14,600 509 1.6 1/4 9.5 0.55
NHG-100A 100 x 19 x 12.7 9,500 364 2.3 3/8 12.7 0.65
NHG-125 125 x 19 x 12.7 7,500 405 3.2 3/8 12.7 0.90
NHG-150 150 x 25 x 15.9 6,200 437 4.6 3/8 12.7 1.1

Angle Grinders 

A wide selection of angle grinders offer you a greater choice for your particular work.

 

Safety Grip Type

●100mm(4")Built-in governor
NGS-100 photo
NAG-400A_photo
NGP-100 photo
NAG-1F-04 photo
NGS-100
NAG-400A
NGP-100
NAG-1F-04

Safety Grip Type 

●125mm(5") Non governor ●150mm(6")Built-in governor
NGP-125 photo
NAG-1F-05 photo
NAG-60 photo
NAG-6XA photo
NGP-125
NAG-1F-05
NAG-60
NAG-6XA

Safety Grip Type 

●180mm(7") Built-in governor
NAG-70A_photo
NAG-70S_photo
NAG-7X_photo
NAG-2 photo
NAG-70A
NAG-70S
NAG-7X
NAG-2

Safety Grip Type 

●180mm(7") Built-in governor ●230mm(9") Built-in governor
NAG-2E photo
NAG-77HA photo
NAG-230E photo
NAG-2E
NAG-77HA
NAG-230E

Safety Lever type

●100mm(4")Built-in governor ●125mm(5")Non governor ●180mm(7")Built-in governor
NAG-1FLW-04 photo
NAG-1FLW-05 photo
NAG-70ALW photo
NAG-1FLW-04
NAG-1FLW-05
NAG-70ALW

Safety Lever type

●180mm(7")Built-in governor ●125mm(5")Non governor ●230mm(9")Built-in governor
NAG-2ELW photo
NAG-77HALW_photo
NAG-230ELW photo
NAG-2ELW(Long spindle type)
NAG-77HALW
NAG-230ELW(Long spindle type)

Safety Lever type ・ Light/Left replaceable Handle

●100mm(4")Rear exhaust,
Spindle lock system
●125mm(5")Rear exhaust,
Spindle lock system
NAG-11A-04 photo
NAG-11A-05_photo
NAG-11A-U5
NAG-11A-04
NAG-11A-05
NAG-11A-U5

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Capacity(Wheel Size) Spindle thread Max.Free speed Overall Length Height Mass Max. output Air Inlet Thread Hose size Average Air Consumption

mm in min-1 mm mm kg kw Rc mm m3/min
NGS-100 100x6x15 - 13,600 192 85 1 0.7 1/4 9.5 0.5
NGP-100 100x6x15
13,600 225 97 1.8 1.2 3/8 9.5 1
NAG-400A 100x6x15 - 13,600 216 86 1.6 0.8 1/4 9.5 0.7
NAG-1F-04 100x65x15.9 - 12,700 190 74 1.5 0.87 1/4 9.5 0.68











NGP-125 125x6x22
10,900 225 104.5 1.9 1.2 3/8 9.5 1
NAG-1F-05 125x6x22 - 12,700 187 77 1.5 0.87 1/4 9.5 0.68











NAG-60 150x6x22
9,000 237 109 2.8
3/8 12.7 1.1
NAG-6XA 150x6x22 5/8"-11UNC 9,000 230 175 2.5 0.66 1/4 12.7 0.7











NAG-70A 180x6x22 5/8"-112UNC 7,600 260 106 3.1 0.96 3/8 12.7 1.2
NAG-70S 180x6x22 5/8"-11UNC 7,600 237 109 2.8 0.88 3/8 12.7 1.1
NAG-2 180x6x22 5/8"-11UNC 7,600 275 122 4 0.96 3/8 12.7 1.2
NAG-2E 180x6x22 5/8"-11UNC 7,600 275 135 4.1 0.96 3/8 12.7 1.2
NAG-77HA 180x6x22.2 5/8"-11UNC 8,400 298 120 4.1 1.5 3/8 12.7 1.4
NAG-7X 180x6x22
7,600 230 110 2.5
1/4 12.7 0.65











NAG-230E 230x6x22 5/8"-11UNC 5,500 275 135 4.4 0.96 3/8 12.7 1.2











NAG-1FLW-04 100x6x15.9 - 12,700 232 77 1.5 0.87 1/4 9.5 0.68
NAG-11A-04 100x6x15.9 - 12000 248 94 2.2 0.88 3/8 9.5 0.8











NAG-1FLW-05 125x6x22 - 12,700 232 77 1.5 0.87 1/4 9.5 0.68
NAG-11A-05 125x6x22 M14x2.0 12000 248 98 2.3 0.88 3/8 9.5 0.8
NAG-1A-U5 125x6x22 5/8"-11UNC 12000 248 112 2.2 0.88 3/8 9.5 0.8











NAG-6XALW 150x6x22 5/8"-11UNC 9,000 250 110 2.5 0.81 1/4 12.7 0.65











NAG-70ALW 180x6x22 5/8"-112UNC 7,600 279 107 3.1 1.2 3/8 12.7 1.2
NAG-2ELW 180x6x22 5/8"-11UNC 7,600 321 135 4.1 1.32 3/8 12.7 1.2
NAG-77HALW 180x6x22.2 5/8"-11UNC 8,400 324 120 4.1 1.5 3/8 12.7 1.4











NAG-230ELW 230x6x22 5/8"-11UNC 5,500 321 138 4.3 1.32 3/8 12.7 1.2



Die Grinders

Die grinders are suitable for precise, delicate finishing as required in handling small points and burrs.

 

●Lever type
RG-16AK_photo
RG-25 photo
RG-16AK-06
6mm collet chuck
RG-25-03
(3mm collet chuck)
RG-25-06
(6mm collet chuck)
RG-25-10
(1/8" collet chuck)
RG-25-20
(1/4" collet chuck)

Grip type
RG-382A photo
RG-383_photo
RG-38CA photo
RG-38CX_photo
RG-382A-06
(6mm collet chuck)
RG-382A-20
(1/4" collet chuck)
RG-383-06
(6mm collet chuck)
RG-383-20
(1/4" collet chuck)
RG-38CA-06
(6mm collet chuck)
RG-38CA-20
(1/4" collet chuck)
RG-38CX-06
(6mm collet chuck)
RG-38CX-20
(1/4" collet chuck)

 

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model type Max.free speed collet size Overall
length
Mass Air inlet thread Hose size Average air consumption
min-1 mm mm kg Rc mm m3/min
RG-16AK Lever 35,000 6 178 0.4 1/4 6.3 0.25
RG-25 Lever 30,000 6 174 0.52 1/4 6.3 0.4
RG-382A Grip 22,000 6 184 0.5 1/4 9.5 0.5
RG-383 Lever 22,000 6 178 0.6 1/4 9.5 0.5
RG-38CA Grip 22,000 6 189 0.5 1/4 9.5 0.5
RG-38CX Lever 22,000 6 183 0.6 1/4 9.5 0.5



Impact Wrench : Clutch Hammer

The Chipping Hammers are used for a lot kind of chipping application.

 

●Spring retainer type
AA-00SP_photo
AA-0SP_photo
AA-1ASP_photo
AA-00SP(R), (H)
AA-0SP(R), (H)
AA-1ASP(R), (H)

●Spring retainer type
AA-2SP_photo
AA-3SP_photo
AA-75SP_photo
AA-2SP(R), (H)
AA-3SP(R), (H)
AA-75SP(R), (H)

●Low Vibration type
AA-15XSP_photo
AA-3XBSP_photo
AA-15XSP(R), (H)
AA-3XBSP(R), (H)

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Blow
per
minute
Piston
Diameter
Piston
stroke
Overall
Length
Mass Air
inlet
Thread
Hose
size
Average
air
consumption
min-1 mm mm mm kg Rc mm m3/min
AA-00SP(R), (H) 3,800 18 45 223 2.1 1/4 9.5 0.3
AA-0SP(R), (H) 3,200 18 75 281 2.4 1/4 9.5 0.35
AA-1ASP(R),(H) 2,800 24 51 300 4.2 3/8 12.7 0.4
AA-2SP(R), (H) 2,400 28 51 312 5.9 3/8 12.7 0.5
AA-3SP(R), (H) 2,000 28 76 339 6.2 3/8 12.7 0.5
AA-75SP(R), (H) 2,000 28 76 344 6.2 3/8 12.7 0.5
AA-15XBSP(R), (H) 2,000 24 70 342 4.9 3/8 12.7 0.5
AA-3XBSP(R), (H) 2,000 28 76 347 6.9 3/8 12.7 0.5


Concrete Breakers

Forged body breakers deliver powerful demolishing and ensure longer life.

 

CB-15B photo
CB-30A_photo
CB-15B
CB-30A

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Blow per minutes Piston Diameter Piston stroke Overall length Mass Air inlet thread Hose size Average air consumption
min-1 mm mm mm kg G mm m3/min
CB-15B 1,300 φ38 130 499 13.5 1 19 1.4
CB-30A 850 φ45 165 594 29 1 19 1.3


Tappers

The double botton tapper makes tapping work speedy so leaving a fine finish.

 

NRT-8P_photo
NRT-10H photo
NRT-8P
NRT-10H

NRT-8P_photo

*NRT-8P : Drill chuck is an option, sold separately.

 

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Tapping/
Drilling capacity
Jacobs chuck Free speed Overall length Mass Spindle offset Air inlet thread Hose size Average air consumption
mm No. min-1 mm kg mm Rc mm m3/min
NRT-8P 8 1 1,700 180 1.2 23 1/4 9.5 0.55
NRT-10H 6~10 2S 350 257 2.0 160 1/4 9.5 0.6



Hoists

The NPK Air Hoist is free from malfunction even if used in a location that is subject to high temperature and jumidity or exposed to heavy dust. The operating speed can be adjusted by manipulating the handle. Also, this hoist is internally equipped with a fine adjustment device.

●Pull Cable Type
RHL-250_photo
RHL-500_photo
RHL-1000 photo RHL-2000 photo RHL-2800 photo
RHL-250
RHL-500
RHL-1000
RHL-2000
RHL-2800

●Pendant Control Type
RHL-250P_photo
RHL-500P_photo
RHL-1000P_photo
RHL-2000P photo RHL-2800P photo
RHL-250P
RHL-500P
RHL-1000P
RHL-2000P
RHL-2800P

●Pendant Control Type
with Load Limiter
NRE-1000 photo
NRE-1000

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Chain Capacity Standard lift Lifting speed max. load Mass Air inlet thread Hose size Average air consumption
kg mm m/min kg Rc mm m3/min
RHL-250 Link 250 3.0 27 16 3/8 12.7 1.3
RHL-500 Link 500 3.0 12.6 16 3/8 12.7 1.3
RHL-1000 Link 1,000 3.0 5.7 22 3/8 12.7 1.3
RHL-2800 Link 2,800 3.0 2.2 60 G1 19 1.7
NRE-1000 Link 1,000 3.0 5 28 3/8 12.7 1.05
RHL-250P Link 250 3.0 27 18 3/8 12.7 1.3
RHL-500P Link 500 3.0 12.6 18 3/8 12.7 1.3
RHL-1000P Link 1,000 3.0 5.7 23.5 3/8 12.7 1.3
RHL-2800P Link 2,800 3.0 2.2 63 G1 19 1.7



Auto Chiselers

NPK range of chiselers makes this an all purpose tool, capable of functioning superbly in any difficult parts of the chassis or body.

 

NBH-400_photo
NBH-600A_photo
NBH-400
NBH-600A

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Blow
per
minute
Piston
Diameter
Piston
Stroke
Overall
Length
Mass Air inlet
Thread
Hose
size
Average
air
consumption
min-1 mm mm mm kg Rc mm m3/min
NBH-400 1,600 13 95 217 1.4 1/4 9.5 0.11
NBH-600A 1,500 19 68 228 2.0 1/4 9.5 0.16


Drills

The compact designed drills assure best possible drilling performance.

 

●Non Reversible Type (*Drill chuck is an option, sold separately.)
NRD-6SA_photo
NRD-6PB_photo
NRD-10P_photo
NRD-12PA_photo
NRD-6SA
(Taper type)
NRD-6SA(T)
(Thread type)
NRD-6PB
(Taper type)
NRD-6PB(T)
(Thread type)
NRD-10P
(Taper type)
NRD-10P(T)
(Thread type)
NRD-12PA
(Taper type)
NRD-12PA(T)
(Thread type)

●Reversible type
NRD-16R_photo
NRD-23R_photo
NRD-14R, 16R, 19R, 22R
(Grip type)
NRD-14RLW, 16RLW, 19RLW, 22RLW
(Safety Lever type)
NRD-23R, 25R, 28R, 32LR
(Grip Type)
NRD-23RLW, 25RLW, 28RLW, 32LRLW
(Safety Lever Type)

 

【Specification】

*Specificatioins are subject to change without notice.
*Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Drilling capacity Jacobs chuk Free speed Overall length Mass Spindle offset Feed length Air inlet thread Hose size Average air consumption
mm No. min-1 mm kg mm mm Rc mm m3/min
NRD-6SA 6.5 1 2,800 166 0.8 - - 1/4 6.3 0.5
NRD-6PB 6.5 1 2,400 149 0.8 - - 1/4 6.3 0.5
NRD-10P 10 2S 2,000 156 1.1 - - 1/4 9.5 0.55
NRD-12PA 13 6 1,500 187 2.6 - - 1/4 9.5 0.65
NRD-14R 14 MT1 1,100 436 5.3 39 60 3/8 12.7 1.1
NRD-16R 16 MT2 900 451 5.5 39 60 3/8 12.7 1.1
NRD-19R 19 MT2 750 451 5.5 39 60 3/8 12.7 1.1
NRD-22R 22 MT2 600 451 5.5 39 60 3/8 12.7 1.1
NRD-23R 23 MT2 500 355 10.5 41 100 1/2 12.7 1.4
NRD-25R 25 MT3 400 355 10.3 41 100 1/2 12.7 1.4
NRD-28R 28 MT3 350 355 10.3 41 100 1/2 12.7 1.4
NRD-32LR 32 MT3 270 355 10.3 41 100 1/2 12.7 1.4